I just built a pole barn (36 x 48). I put clear panels on one side 2
feet from the eave to allow light in during the daytime hours. This
seems to work great. I will use this mostly for storage of my...
Back in the olden days you could take a carburetor to the shop and
they would put it in "the hot tank". It came out looking brand new
(the casting). Does anyone know what that chemical was?
I kno...
Recently, I made my wife an oak desk, which created alot of sawdust.
I used my shopvac to clean it up. I started to just throw the sawdust
away in the trash can, but I wanted to ask around if sawdu...
Just saw the Worx Tri-Vac on TV and it looks great. However, I can't find
out if the mulching blade is metal or plastic.
Does anyone know what material the blade is, and how well does the machine ...
I just cleaned the gutters of the house we bought last year, and there
was ~1" of a sandy dirty debris in the bottom of the gutters. It
looked like some dirt mixed with the sandy/pebbly offal from t...
The CBS evening news just broadcast a story about high-sulphur content
in drywall that is causing problems in new and renovated homes.
Something that was originally being blamed on cheap drywall m...
The little carburetor on small 2 stroke engines can be hard to clean
if you have blockage in a main jet. Blowing from the reservoir side
can just pack the crud in tighter. You have to get at it from...
I have hand tools (garden pruners, hedge shears, shovels, spading
forks, saws, etc) that have become slightly rusted.
To remove the rust, I soaked the tools in warm, soapy water and used a
scrub ...
I have a load of dirt. It is probably fairly sterile; that is, not
too much humus in it.
I want to convert it into topsoil. What I have done in the past is to
add peat moss and manure. This se...
I remember back when I was a little kid I used to play gas station with
the water hose and the oil filler tube. I know I watered many places,
neighbors, relatives. Seems the garden hose and the oi...
Here's a picture of some ground contact pt 6x6's used as a retaining
wall. It was 18 years old. I had to replace about half of it. The
rest was in "ok" condition. A lot of the rot started where ...
This is a question for those knowledgable about bandsaws. I have a Ryobi 9"
bandsaw, BS903 (I think...). I comes with a 1/4" blade. I'm trying to do a
straight cut through a piece of weed that is ...
We have a small greenhouse attached to the south side of our home.
It's 14' X 12' with a shed roof tapering from 10' on the house side to
6'. Roughly 1,400 cubic feet. It's a 2x4 frame with double-w...