OK, question time. I have a house about 40 years old or so, with
hollow core doors, and for whatever reason, they are 78" or were cut
to 78"... I Am replacing with clear pine solid doors, problem i...
I'm 3/4 of the way through a DIY refinish (interior) of 11 wood frame
windows and 8 wood door frames. The reason is wall paint over-paint on the
unpainted (stained / poly / varnish) wood frames.
...
Hi all. My garage door is old (maybe 30 years) and probably needs to
be replaced - but not right now. In the short term, I'm seeking a
little advice from the good folks here. When the door is clo...
Or so says a Florida homeowner
"A frustrated homeowner spray-painted a "Hitler" message on her own house to
address an escalating tiff with her homeowners association, causing unrest
among neig...
I've got a few projects coming up that I'd like to save my energy
spent mixing mortar by hand for the project itself.
I work alone & don't work for long any more- so mix one batch and I'm
done fo...
I have a detached garage that is 30x30 with 10 foot ceiligns that was
just built. The outside is metal and standard stud walls in the inside
with 2 feet on center studs for the most part.
I am de...
I recently repaired a small hole in my Fiberglass tub with an autobody
repair kit. The tub holds water without leaking, but I would like to paint
over the repaired area. Are there any aerosol-bas...
I recently added some greenboard that butts up to existing drywall.
The existing drywall has semi-gloss paint on it. How do I prep this?
Light sand? I don't want the mudd to start lifting or crackin...
I need help from the prick who recommended that I should go back to finger
painting.
The guy I need help with is this pudgy guy , 30 something-ish got black
hair, his name is Dave
YOU KNOW TH...
Our house has a white flocked ceiling, which is pretty nice. In the
areas right around the ceiling HVAC vents, the flocking has gotten
discolored over the years, partly because of dust that can be v...
Hey Guys, I have a double 20 amp breaker that is connected to each
other. I have one side running the kitchen and one side running the
washing machine in the garage. I was told this is a standard pr...
I'm still trying to put all my electrical stuff to rights... part of
that process is providing a few auxiliary grounds upstairs so that the
previous renovation work that was wired with grounded Ro...
I am going to be painting some laminate kitchen cabinets. They are in a
home that I own that I will be renting out.
My plan is to clean the cabinets, probably lightly sand the surface, then
pr...