Just bought a small compressor at Harbor Freight, for
inflating tires, etc. Also wish to run an impact wrench for
occasional car repairs.
I did some internet research. On the HF web site, Some ...
With the light switch off, but the fuse box on, if I unscrew where a
metal outdoor spotlight base meets the soffit, and grasp and pull the
base, AND if part of the base touches a wire left bare behi...
At least I think that's what happened.
Several outlets stopped working. I flipped the relevant switch on the
breaker box
but it didn't help.
This is the first time I've confronted such a prob...
I have a small wiring job to complete and was wondering if it is
better to use the screw terminals or the holes on the back to wire
outlets and such?
...
http://hfreviews.com/item.php?id=8507#review1665
Review by Stormin Mormon on November 7th, 2010
Bought one, tonight. Comes with a set of batteries. With
a plastic spacer, so the cheap car...
Picked up the following quote on a technical news group where a
particular thread was expressing concern about the severe
deterioration of 'ordinary' AM (Amplitude Modulated) radio broadcasts.
Much...
After disconnecting and reconnecting the wires in an electrical
circuit, my low-tech current tester seems to indicate (with low lamp
brightness) that the current in the reconnected wire circuit isn'...
I am doing some remolding and I ran some wiring. Since I had a bunch
of cat5 cable I ran it to use for phone wire. I went to the big box
store to get some module plugs for the phone and all they s...
My excellent track hoe operator cut my phone cable. He called a buddy who
works for the phone company, and he says the phone company charges $300 to
come fix it. It is a copper shielded 4 line w...
I posted this already (I thought) but can't find. Here goes again.
One electrical circuit has gone out, comprising four outlets.
Typical So. Calif stucco house.
I checked the breaker covering ...
Sorry, I posted the same query again (One Circuit Went Out) because
I couldn't find my first post. Sure enuff, the minute I posted the
duplicate,
I found all the replies to the first one.
Sorry...
My CO detector reached its end of life and needs to be replaced. Its a
Sentrol 240-COe 12v with NO/NC/c wiring for my alarm system.
http://www.techmall.com/GE-Security-Commercial-Grade-Carbon-Monoxi...
So the new place is in a civilized neighborhood, and I'm thinking of
acquiring a real edger. She has a manual type but it's tiring to use. I
edged once with the string trimmer but went through a l...
I need to replace the thermal fuse in my toaster oven.
I know that when I took the oven apart the gear for the thermostat
moved and I assume it will take some trial and error to get it
positioned...