The Henchman - 2011-01-04 14:15:00 [In: Flooring | ]
I'm considering installing 150 sq feet of engineered hardwood flooring in
our soon to be office. I was surprised to learn that Engineered wood is
pricier than solid. However the sub floor is con...
I've always used no-snap screws for putting down underlayment for vinyl
then filled in countersinks with flooring skimcoat/filler.
What about ring shank nails? I would think the heads do not get ...
I recently had a contractor add a 2 story addition to my house. After
finishing the ceiling below and the hardwood floor above, I noticed that
it was not level. There was about an inch and a hal...
I recently had a contractor add a 2 story addition to my house. After
finishing the ceiling below and the hardwood floor above, I noticed that
it was not level. There was about an inch and a hal...
I recently had a contractor add a 2 story addition to my house. After
finishing the ceiling below and the hardwood floor above, I noticed that
it was not level. There was about an inch and a hal...
I recently had a contractor add a 2 story addition to my house. After
finishing the ceiling below and the hardwood floor above, I noticed that
it was not level. There was about an inch and a hal...
I laid down attached pad carpet in the basement. I have a Kanga carpet
wall trimmer tool.
The attached pad makes it very difficult to crease the carpet against
the wall. Therefore I can't determi...
I had some hardwood flooring delivered yesterday, and I noticed on the
box it calls for 72 hours for the wood to adjust to the environment,
and humidity in the 40-55 range. It suddenly occurred to ...
I'm disabled so I had a contractor laydown laminated flooring
in my kitchen - three years ago. He put in a 2" metal threshold
between the floor and the carpeting.
The problem is that the lamin...
A few years back I noticed a hole had developed next to the drain in our
50 year old porcelain on cast iron (?) bathtub. At first I sealed it
with RTV and painted it to match but then I got conce...
Hello!
We are in the very beginning stages of planning for some home
remodeling on a tight budget. I have come up with some preliminary
ideas that I ran past my husband who said, "I'm not sure t...
I posted about a week ago, regarding how hard I was finding it to get
the house humidity up after realizing I had the humidity control on
the 'stat turned off (recap - Minnesota, mostly between 0 an...
Trying to add a coating to OSB flooring. I am thinking of applying
water downed
water resistant carpenters glue, as a shield. Paint might be better ??
greg
...
> I'm disabled so I had a contractor laydown laminated flooring
> in my kitchen - three years ago. He put in a 2" metal threshold
> between the floor and the carpeting.
>
> The problem is ...
MAY be using them soon. At the Borg they had hard plastic and softer rubber
(soft like a door stop wedge). Flooring will be vinyl.
When is each appropriate?
...