Hi,
All the doors in my house are dressed the same: 3/4 sanitary casing with
cabinet head. I also have 3/4 baseboard.
I'm replacing the casing on a couple of doors. The problem is that
sanit...
I'm attempting to add a recessed medicine cabinet. My understanding of
the NEC code is that any splices must be in an approved box and
accessible. The accessible part is what I'm having issue with. ...
I'm trying to remove my vanity cabinet but the center pipe (drain)
won't budge by hand. Is this glued? It has grips on it like it would
be screwed on. I can't get the vanity cabinet out with this on...
After replacing my under cabinet flourescent tubes, I cracked the diffuser
(plastic cover) when trying to snap it into place. I called Home Depot but
they do not have a separate replacement part. I s...
So I made an interesting discovery tonight while working on the kitchen
cabinets. Most of the doors do not stay shut when they are closed. The "snap" to
lock them in place is gone. So, I took the tw...
Need some special hinges, possibly some Euro-style ones.
Problem: Installed a kitchen cabinet that is behind a piece of door
trim. (There was no other way to do it.) There's just enough room (~1"...
What if i have a 12" wide cabinet in the run & there is no stud behind it ?
--
Dell Inspiron
Pentium dual-core 2.2 GHz
2 GB DDR2 SDRAM
Windows Vista Home Premium SP1
--- news://freenews.net...
I have made a lot of kitchen cabinets, but I have never decided for
sure what standard 24 inch depth means--is it the overall depth of the
carcase, or is it the overall depth of the cabinet with dra...
Sam Takoy - 2010-01-13 12:05:00 [In: Carpentry | ]
Hi,
I have hung BB so I can still choose b/w spackle and plaster.
My prospective cabinet maker told me that plaster is inherently uneven
and might require more scribing when installing.
Agr...
My GE microwave JEM31GA 002 does not heat. Everything seems to work
fine on it except for cooking. GE website does not offer any self-help
on microwave repair. This microwave fits in the cabinet ...
Our 22 year old dishwasher is finally worn out, so we're going to replace it.
When I removed it, I found several things that I didn't like. The copper tubing
for the water inlet is kinked. That make...
I am going to rough in a lavatory sink. I know it needs to be 32" wide and
I set the PVC drain stub out right in the middle and about 17" above the
floor slab.
Now I want to rough in the water...
There was a small leak over a long period of time under my kitchen sink. This
past weekend, I went under the house for other reasons. Out of curiosity, I
looked at the floor underneath the sink. It ...
I have two repair jobs that I think are going to be facilitated by
some casting resin.
First, the surface molding on some kitchen cabinet doors is broken and
missing. I have no chance of matchin...
I have this room gutted out and was taking a look at what I needed to
re-wire. This is a small room that is above the downstairs bedroom and
next to the upstairs restroom.
When I took the ceiling...