Hi
I did not list the different methods I tried, starting with different
weights on top, insuring that everything is "tight" inside, checking
the rubber mounts used by the compressor, diffe...
I am nearing completion of a kitchen remodel. I am wondering how you
have dealt with sealing the exhaust fan port to the ducting going to
the attic.
I was able to thoroughly seal the exhaust por...
We have a Whirlpool built in wall oven
in a cabinet. The right side is exposed
to the room and has a finished cabinet
panel on that end. During a self
cleaning, the cabinet side gets very, I...
OK, the subject is going to make everyone say "no way". But wait ...
We are having part of our roof reframed because it's a mess, repairing the
rest and putting metal on the whole thing. It's all ...
The 25 year old faucet in my backyard is near failure. It squeaked when
turned and it's not a metalic squeak, but twisting-the-cork-off-a-bottle
kind of squeak, and water drips out of the handle a...
I've got a set of kitchen cabinets that I want to move to a new location.
Would it be hard to find the filler, side panels to fit the new area which
is about 8" wider then the old location. I don...
Hi,
I think I have finally "tamed the beast". My latest technique (two boards
with long threaded rods, see below) is working! I have been using the
dehumidifier for the past two weeks since...
Hi,
I need to replace one side of a wooden deck, which was damaged in
a storm. I've called 3 different contractors / carpenters, found in
phone book. Every time, I get an answering machine, ...
I'm going to replace all 6 of my interior doors. I've replaced a door
once, and bought just a door (i.e. not pre-hung). It came out okay -
but just okay. I'm thinking that to do 6 doors I'd be bett...
Following up on recent discussions here on the BP oil spill and its
spillover effects on BP dividend recipients, a big-picture look from the
always-trenchant Alex Cockburn.
N.B.: Cockburn, th...
Alan Blinder, a Princeton professor and former Federal Reserve vice
chairman, says it won't be surprising years from now if a carpenter in the
U.S. earns more than a college-educated computer operat...
Tape has many uses but if you let it set for a full year (or more) before
attempting to remove it from a Formica cabinet or metal file cabinet, the
paper backing comes off just fine but the adhesi...
In looking homes, I've begun to see what they call air or
pneumatic switches to control disposals. In almost all instances,
these have been mounted vertically in the cabinet tops, toward the
si...
this is a fairly new cabinet(s)(approx 2yrs) ....but under the kitchen
sink the bottom of the facing which includes both door openings is
pulling away or has come loose from where it was at one time...
I bought new kitchen cabints (white with white foil doors) and the company
when out of business before I got all my cabinats. I'm trying to match the
doors so I can finish my kitchen. The stores I w...